The Investment environment Report on China’s DRI Industry in 2012

作者:24 发布时间:2012-02-23 文字大小:【大】【中】【小】

The Investment environment Report on China’s DRI Industry in 2012

 (click here for purchase; order ; hotline: 86-22-60457158/15822687578    )
The investment environment report is written based on viewpoints and passages of the domestic experts in DRI industry, hoping to offer advice and help for the industry development as well as to offer guide for your investment.

      1. Macro Analysis
1.1 seize the good timing to develop China’s DRI
1.2 current situation and development of non-blast-furnace ironmaking technology in China,2011
1.3 situation and development of DRI industry in China, 2011
1.4 current situation of blast furnace and non-blast-furnace ironmaking technology
1.5 information on merging and reorganization of some iron and steel enterprises as well as government macro policy on iron and steel industry.
2. Material
2.1 technology of mineral processing VS raw material of DRI
domestic iron ore resources can meet the current demand of DRI; eye correctly on the relationship between the quality and value of iron ore concentrate; China’s mineral processing technology ranks first in the world
2.2 Development outlook on China’s scrap in 2009 and advice on the    development of the non-blast-furnace ironmaking industry: the operation of China’s scrap market in 2008 with the impact of the global financial crisis;  prediction on the supply and demand in China’s scrap market in 2009; advice on the development of China’s non-blast-furnace iron making industry
3. Production Process
3.1 Analysis on the development of coal making gas----- shaft furnace DRI in China
It is one of the most significant ways to develop China’s DRI. The method of coal making gas and the selecting on iron is the key point for the technique to be industrialized. The DRI shaft furnace gas making system may prefer coal with good applicability and low-pressure gasification. Since the DRI shaft furnace lays strict standard on lump ore /pellet, the special lump ore originated from high-quality concentrate within domestic iron ore resources may work. Besides, setting up the equipment specially producing lump ore for DRI in an area with rich resources and convenient transportation is the urgent need for the development of DRI technology in China.
3.2 Production practice on DRI in the DRI Plant affiliated with Tianjin Pipe Corporate
3.3 current situation of producing DRI in tunnel kiln in China and its development
   Back to history of the development of tunnel kiln DRI in the world and China; also the analysis on the advantage of the technology and its development.
3.4 technology development of comprehensive utilization of vanadium, and titanium used in producing DRI in rotary hearth furnace
4. Application
4.1 current situation of the raw material composition for EAF steelmaking and the advice on its advancement
     In the thesis, a research is conducted on the current situation of the raw material composition for EAF steelmaking, production cost of plants and the production of DRI. Besides, the study on the domestic application of DRI is also carried out. The thesis also draws a brief conclusion on technology advancement of the two main gas-based DRI technologies.
4.2 application of sponge iron on the EAF steelmaking
     The experiment on how the proportion of sponge iron affects the time, energy consumption per ton, yield of liquid steel and residual elements is carried out. The conclusion is that when the proportion of sponge iron is around 12%, the casting time and the energy consumption runs lowest and the rate of liquid steel yield comes high up to 88%. Since sponge iron is quite pure, the increasing proportion of the material will effectively dilute residual elements in liquid steel, which can apparently improve the quality of liquid water.
4.3 application of DRI on the 150 ton-arc furnace steelmaking
     Analysis shows that when 30-35 t sponge iron is added, the index of super level can be met. Besides, the content of Pb、Sn、As、Sb、Bi is able to meet the technique requirement.
5. On energy saving and emission reduction
5.1 analyses on the energy consumption by blast furnace and non-blast furnace
   The aim to develop COREX and FINEX is to replace coke iron making. However, the coke iron making cannot be totally replaced in the current period. The energy consumption and the emission amount of CO2 are both higher in the smelting reduction process than in the blast furnace iron making process. Therefore, the study on the development of the process should be carefully carried out.
5.2 Development opportunity of DRI under the environmental protection policy
    The price of raw material is continuously rising due to the replacement of small-sized blast furnaces under the macro policy and the increasingly growing domestic market for iron and steel. Especially the price of metallurgical coke is lifting. The whole metallurgy industry shows the greatest enthusiasm in the non-blast-furnace iron making technology. And the DRI and smelting reduction technologies have gradually become the eyes-catcher in the industry.
6. Industry Standard
Outlook on the industry standard: DRI for iron making
Outlook on the industry standard: DRI for iron making is written by Tianjin Pipe Group,Northeastern University and China Metallurgical Information and Standardization Institute.